Step1: Download the.exe file(PowerSuite2010_Setup_Windows.exe)and install it.

Step2: Go to “PowerSuite BootCare 2010″ tab and download the BootCare.ISO file to create a Bootable CD.

Step3: Set your BIOS Boot Sequence to Boot firstly from CD (may be not necessary).

Step4: Boot From Spotmau CD.

After your purchase, you will receive a E-Mail with the download link. Just click the download link，save file to a path that you know.

After enough time passes, download will finish.

The file you download is an .exe file

Just double click this exe file to install our software.

please enter your info

Notice:

this license code is seven-letter combinations and each combination have five letters/numbers,only letters/numbers and hyphens are allowed in the license code,any space is not included.So Please do not add any space key in either the front or the end! Otherwise,they will be invalid.

Setup2:  download the BootCare.ISO

Burning a Bootable CD:

It’s possible (but unlikely) that BurnCDCC may not be compatible with all CD/DVD drives. In that case, some other program may be used to burn the ISO file to a CD. It is important to mention that one does not merely copy the ISO file to a CD. Instead, the program uses the information contained within the ISO file to create the appropriate CD. As long as you make whatever program you are using aware of the fact that you are dealing with an ISO file, it should work properly.

(Note: Please pay more attention to the Step 3.)

Step 1: Double click on the burncdcc.exe to run the BurnCDCC software.

Step 2:

• On the BurnCDCC software, please click the Browse button to find and select the .ISO file you have downloaded.
• Check the “Finalize” and the “Read Verify” box.
• Selecting lower speed such as 4X or 8X is recommended.
• Click on Start button to start burning your CD.
• Insert a blank CD into your CD writer.

Step 3: Sometimes BurnCDCC will push your blank CD out from your CD writer and display a message as “Please insert a blank disc into the drive”. If this is the case, just push your blank CD back into your CD writer and press the “OK” button.

Step 4: After BurnCDCC starts burning the CD, the “Start” button becomes disabled.

Step 5: After BurnCDCC finishes the burning, the “Start” button will become enabled again and your CD writer will pop your CD out. Your CD is ready to use now! Press “Close” button to exit the BurnCDCC.

After burning, you will get the following files:

Notice:   After the burning process is completed successfully, several files will be created on your CD instead of a single .ISO file.

How To Use Spotmau PowerSuite CD

Spotmau PowerSuite CD includes TWO parts:

(1) WinCare™

WinCare™ can run while you are in Windows. Just put the Spotmau PowerSuite™ CD into your CD drive and wait for it to run automatically. If it does not automatically run, please go to “My Computer”, and then browse the contents of this CD, and click the autorun.exe.

(2) BootCare™

BootCare™ can run only after your computer boots from the Spotmau PowerSuite™ CD. Just put this CD into your CD drive and restart your computer. If your computer does not boot from this CD, please read the instructions below.

If your computer does not boot from this CD:

If your computer does not boot from this CD, you may need to set your CD-ROM drive as the first boot device.

To set your CD-ROM drive as the first boot device you need to go into the system setup (BIOS). To go into the system setup you need to restart the computer and hit a specific key on the keyboard as soon as the screen comes up. You can refer to the right top corner or the bottom of the screen for the specified key. Below is a list of common BIOS keys.

• Delete
• F1
• F2
• F3
• F5
• F10
• Escape
• Insert
• Control + Escape
• Alt + Escape
• Control + Alt + Escape
• Control + Alt + Enter

On most systems a message will come up telling you which key to hit to enter the system setup. Below is a picture of a system starting up with a Phoenix-Award BIOS. Notice the message at the bottom of the display. On this particular system setup you would hit the Delete key while this message is being displayed to enter the setup utility.

Once you have entered the System Setup you should come to a main menu. Below is a picture of the main menu for a version of Phoenix-Award BIOS. Yours may not look exactly the same, but the basic idea is the same for all System Setup utilities.

In this particular System Setup utility, the boot device settings are under the ‘Advanced BIOS Features’ category. Yours may be in a different category. If your System Setup does not have an ‘Advanced BIOS Features’ category, try looking through the different categories until you find the boot device order settings. Below is a picture of the ‘Advanced BIOS Features’ category.

If the first boot device on your system is set to something else (floppy drive for example), simply change it to the CD-ROM drive. In the picture above you can also see some basic instructions on how to change the settings. Once the CD-ROM drive is set as the first boot device, you need to save the changes and exit the System Setup utility. Usually you can just hit ESC on the keyboard to go back to the main menu and then select ‘Save and Exit Setup’.

There are literally hundreds of versions of System Setup utilities and this is just one example; however the basic idea is the same for all of them. If your system setup does not look the same you may have to use a little intuition to find and change the boot device order.

Booting From Spotmau PowerSuite CD

After you set your Bios, Put the CD in your CD-rom and restart your PC.

Then you will be able to see the following options.

Then Spotmau is booting.

and then you will get

Finally  you will be able to see the main pannel of Spotmau Bootcare2010.

If you can not boot from Spotmau Cd, it is likely that your hardware is not compatible with the common PCs. You can try the Advanced Mode to adjust Spotmau Drivers.

While most computer techs and savvy users usually advise against performing an upgrade from one Windows version to another (what’s called an “in-place upgrade”). There’s always the chance that your new OS could inherit some problems from the old, after all, and it could potentially cause issues with your current programs or hardware.

Truth is, some users want to upgrade and Windows 7 handles the process pretty well. While it might not be an ideal situation, there are plenty of people who are going to take a stroll down the upgrade path. A little careful prep work will help make the experience a pain-free one.

How to burn?

You need to have a CD/DVD-Writer and use the ImgBurn burning software

to burn a CD from this .ISO file.

Using your own burning software is NOT recommended,

since most of them are designed for multi-tasks and

so they are not easy to use for this special purpose.

How to know if I have burned the CD successfully?

On a working PC already running Windows, go to “My Computer”,

and then browse the contents of this CD.

If you have burned the CD successfully, you will see several files in the CD

instead of a single .ISO file.

What to do if I cannot burn the CD successfully?

Please visit our website and submit your qusetion in Free Support.

Normally we will answer your question within 1~2 hours.

During busy periods this may take longer but it is not expected to exceed 12 hours.

Or, if you have not added the “Get it On CD” option,

you can pay additional shipping and handling fee

to receive a physical CD by clicking here.

Just two Steps to burn/create a Bootable CD from the download file:

Step1: Download the ISO file.

Step2: Burn the ISO file to create a Bootable CD.

NOTE: After your purchase, you will receive a download link from us.

Just click on the download link and save the file to a path that you know.

Step1: Download the bootcare file.

When click the link, you will receive a window which will ask you to save the file

What is BossKey?

BossKey in “Spotmau Secretary” tool allows you to hide active programs or windows immediately by using a hotkey. You can hide the browser windows, folder windows, applications windows, even some icons on taskbar when your boss (or those who you don’t want them to see your screen) approaches. Everybody should have his bosskey for securing personal privacy. With a cool and user-friendly interface it is super easy for you to use Spotmau BossKey.  

When should you use BossKey?

Want to scan some news when boss is away? Want to play some little game but lest that the boss would show up at your back suddenly? Writing your private diary but there are people passing by frequently? Don’t worry, BossKey can relieve you from such troubles.

Procedure of dealing with BossKey:

1. To begin, please double click Spotmau icon and enter PowerSuite 2009’s interface, follow these steps: Self Service —> PowerSuite 2009 Wincare –> Spotmau Secretary, then you will see the interface looked just like the following picture.

2.  Once you click , Spotmau Secretary will pop up on the right side of your desktop.
 

3.  Spotmau icon will appear in Windows system tray at the right bottom of you screen . By clicking the Spotmau icon, you can quick-launch Personal Safe, History Cleanup and more.

4.  Click the “Menu” button, then a menu will show up. Follow the steps: Secretary tools –> BossKey.
 

5.  you will see the “BossKey” window:

6.  Tick the “Enable BossKey” to enact this function, and select the programs or windows you want to hide once you hit the bosskey.  

7.  Next, you can choose to set a mouse BossKey or keyboard BossKey.

8.  Mouse BossKey: . When you do left-click and right-click simultaneously, the programs or windows you have set to hide will disappear swiftly from your screen.

9.  Keyboard BossKey: . There are three options for you: . You can choose one from them, whichever is most convenient for you to use.

10.  What’s more, Spotmau Secretary allows you to have both mouse and keyboard BossKey to react to any threat or unexpected people as soon as possible.

11.  Don’t neglect clicking  after you finish all the setting!

What is Memo Management?

Memo Management in “Spotmau Secretary” tool allows you to easily manage your daily, weekly and monthly tasks in an easy-to-use way. You can mark down the important matters in your work or your daily life in Spotmau Secretary, which in turn will show you the matters supposed to happen in the immediate future.

When should you use Memo Management?

Are you up to your neck in a mass of files but don’t know which one is most urgent? Have uncountable meetings to attend but cannot remember the exact dates and venues? One of Spotmau’s POWER SUITE 2009 highly recommended functions —Spotmau Secretary — can relieve you from such troubles.

Procedure of dealing with Memo Management:

1. To begin, please double click Spotmau icon and enter PowerSuite 2009’s interface, follow these steps: Self Service —> PowerSuite 2009 Wincare –> Spotmau Secretary, then you will see the interface looked just like the following picture.

2.  Once you click , Spotmau Secretary will pop up on the right side of your desktop.
 

3.  Spotmau icon will appear in Windows system tray at the right bottom of your screen . By clicking the Spotmau icon, you can quick-launch Personal Safe, History Cleanup and more.

4.  Whenever you need to add memos or notes, please click a date to add it.

5.  You will see a “New Memo” dialog, and the date it shows is in accordance to the date you click on.

6.  You can specify the exact time when you need a reminder here.

7.  The “Memo Content” block allows you to mark down what is going to happen according to your schedule.

8.  Example：

9.  The note will be displayed on the interface of Spotmau Secretary like this.

10.  If you want to manage the memos, you can double click the memo displayer:

11.  Then a window with all the memos and notes will pop up:

12.  Or click the “Menu” button, then a menu will show up. Follow the steps: Secretary tools –> Memo History Managment.

13.  you can also see the “Memo Setting” window:

14.  Ticking the “Enable popup memo” will enact the popup dialog to remind you on time.

15.  The pop up reminder will look like the one as followed:

16.  You shall choose a memo, before you modify or delete it.

17.  If you want to modify a memo or note, the dialog as followed will be shown:

18.  You can reset the remind time or rewrite the memo content.

19.  If you want to delete a memo or note，a dialog will pop up：

20.  Click  to go on.

21.  This dialog will tell you the operation is successful.

Spotmau Secretary helps you keep everything in order.

What is File Shredder?

File Shredder in “Privacy & Security” tool can help you permanently delete files and folders, which you don’t want to be restored by others or yourself in future. The files deleted by this tool can never be recovered with any special tools like Undelete in the world. File Shredder meets US army data protection requirements.

When should you use File Shredder?

Having some sensitive data or secret files that you want to delete from hard disk forever? Worried that these files will be recovered by others and cause problem concerning your privacy? One of Spotmau’s POWER SUITE 2009 highly recommended functions —File Shredder — can relieve you from such troubles.

 Procedure of shredding files or folders:

1. The File Shredder runs while you are in Windows. Double click Spotmau icon and enter PowerSuite 2009’s interface, follow these steps: Self Service —> PowerSuite 2009 Wincare –>Privacy & Security –> File Shredder, then you can have the interface looked just like the following picture.

2.      To begin shredding files, please click .

Tips: To shred folders, the procedure will be more or less the same with shredding files. Remember to click  instead of .

3.  A dialog will show up. Please locate the file(s) you want to shred permanently.

4.  All the files you selected will be shown in the list block and they will be deleted permanently.

5.  If you mistakenly add some files that you don’t want to shred, please choose it by clicking it in the list, and click  to remove it.

6.  Please confirm the files in the list before you rush to click  to delete them.

7.  After clicking , you will see a dialog as followed:

8.  Click  to finish this operation.

9.  When the process is done, the files have been shredded from your hard disk.

What is Personal Safe?

Personal Safe in “Privacy & Security” tool can help you split a private space from your selected disk. And you will see a new disk with the name “Personal Safe” in your “My Computer”(usually marked as “Z”). You can save your important files, private movies, IM chatting record and financial data etc. Without password no one will even notice this space. This NEW technology will protect your personal files more conveniently and safely than ever before.

When should you use Personal Safe?

Provided that you have some private files or business information that requires extra protection from others, what’s more, due to the amount of documents is considerable, it is time-consuming and troublesome to encrypt every piece of them and then decrypt them when needed. One of Spotmau’s POWER SUITE 2009 highly recommended functions — PERSONAL SAFE — can relieve you from such troubles.

Let’s begin exploring the usage and enjoy marvelous convenience and security that PERSONAL SAFE brings to you!

Procedure of dealing with a Personal Safe:

1. The PERSONAL SAFE runs while you are in Windows. Double click Spotmau icon and enter PowerSuite 2009’s interface, follow these steps: Self Service —> PowerSuite 2009 Wincare –>Privacy & Security –> Personal safe, then you can have the interface looked just like the following picture.

2.  To start making a safe, please click “Make a safe”. With a popup window “Create Personal Safe Wizard”, go on with the “Next” button.
 

3.  In this step, a detailed list about the partition on your computer will be shown, please choose one out of them to locate your safe.

Tips: As the system disk, volume C is not a good choice. In addition, you can estimate how large are the private documents and choose the volume with adequate free space.

4.  Afterward, specify the size of the personal safe. The default minimum size is 20M, and the maximum size is determined by the available space on the volume you choose.

5.  The Following step is to set a password for the Personal Safe. Please use 6 to 20 characters, no space and use the letters and numbers. Then retype the password to confirm it.

6.  If you want to ensure whether you’ve set the exact password, you can tick “Display”, and verify the password you just type.

7.  Click “Next”and wait for the POWER SUITE 2009 to create your Personal safe.

8.  When the process is done, you can choose either “Open Safe” or not and click “Finish” to close the window.

9.  If you choose “Open Safe”, it will automatically open the personal safe (Z :) for you. Now you can add whatever you like into your Personal Safe.

10.  And under the root of “My computer”，you can see the safe with the name “Personal Safe (Z:)”.
 

11.  Now your personal safe is in an open state, you can close and reopen it without password. In order to close it actually and protect your information from being seen, you need to click the “Hide Safe” bottom.

12.  Click “close”.
At this time, the safe will disappear from the window under the root of “My Computer”. No one will even notice there is a disk.

13.  Next time when you need to open the personal safe, you can click the “Open bottom” or you can also open your safe by right clicking Spotmau Secretary in the system tray at the right bottom of your desktop.

14.  Type your password to open your safe.

15.  And the Personal Safe (Z :) will pop up itself.

16.  If you no longer need the personal safe, you can choose to destroy it. Click “Destroy My Safe”, and the password is demanded.

17. Click “Yes”.
 

18.  Then your safe will be gone immediately. Beware that you have backed up the documents which you still need in the safe before you destroy it.

19.  If the password is leaked or you simply think that it should be changed, you can click “Change Safe Password”

20.  The current password is needed, and please type the new password twice to confirm it,  and click “OK”

21.  At last you will see this little window.

TIPS:

Now you must be familiar with how to use the personal safe, and here we provide you a tip on the usage of personal safe. You should bear in mind which volume you choose to locate your safe, and make sure that if you need to format this volume you had better back up what are in your safe. Since the safe still belongs to the partition of that volume, format the partition will also Format your safe altogether.

What is IE Management:

IE Management can help you easily customize your IE, secure your IE activities and mange manage your IE settings so that you can use your IE more securely and conveniently.

What kinds of IE general settings do you have?

In IE Management, you can have default browser setting, home page setting, default download directory setting, “Save as” setting in IE file and recovery (IE) setting. By customizing your IE, you can have IE activities more smoothly, securely and conveniently.

Now let’s talk about Home Page setting. Home Page is the first automatically accessed website when you open IE. Here you can set your favorite Home Page.

Procedure of having IE general setting(s):

1. Click the “IE Management” button on the interface of Spotmau PowerSuite 2009 and enter into the “General” page, as followed:

2.  You can set the Home page of IE by doing one of the followings:

a.  Just type in the address of the page on the textbox of “Address”, like this:

b.  If you want to set a blank page as your home page, just click the button “Use Blank”, then it will show:

3.  Finally click the button “Apply” to apply it to your computer. Soon, setting is completed.

What is IE Management:

IE Management can easily help customize your IE, secure your IE activities and mange your IE settings so that you can use your IE more securely and conveniently.

What kinds of IE general settings do you have?

In IE Management, you can have default browser setting, home page setting, default download directory setting, “Save as” setting in IE file and recovery (IE) setting. By customizing your IE, you can have IE activities more smoothly, securely and conveniently.

Procedure of setting my default browser:

1. Click the “IE Management” button on the interface of Spotmau PowerSuite 2009 and enter into the “General” page, then you can see “Default Browser Setting” as followed:

2.  Choose one browser type from the pull-down menu as your default browser, and click “Apply” to apply it to your computer.

3.  Soon setting is completed.

What is IE Management:

IE Management can easily help customize your IE, secure your IE activities and manage your IE settings so that you can use your IE more securely and conveniently.

What kinds of IE general settings do you have?

In IE Management, you can have default browser setting, home page setting, default download directory setting, “Save as” setting in IE file and recovery (IE) setting. By customizing your IE, you can have IE activities more smoothly, securely and conveniently.

Procedure of having IE general setting(s):

1. Click the “IE Management” button on the interface of Spotmau PowerSuite 2009 and enter into the “General” page, as followed:

2.  Default browser settings:

Choose one browser type from the pull-down menu as your default browser, and click “Apply” to apply it to your computer.

3.  Soon setting is completed.

4.  Home page setting:

Home Page is the first automatically accessed website when you open IE. Here you can set your favorite Home Page. You can set the Home page of IE by doing one of the following:

a.  Just type in the address of the page on the textbox of “Address”, like this:

b.  If you want to set a blank page as your home page, just click the button “Use Blank”, then it will show:

5.  Finally click the button “Apply” to apply it to your computer. Soon, setting is completed.

6.  Default download directory setting:

If you are often asked to select a certain directory to save the articles or items downloaded from websites, you can set the Default download directory by doing one of the following:

a.  Just type in a directory on the textbox of “Download Address”, like this:

b.  Click “Browse” to help you find the directory:

7.  Finally click the button “Apply” to apply it to your computer. Soon, setting is completed.

8.  “Save as” setting in IE file:

If you are often asked to select a certain directory to save the web page directory, please use it to set a default directory. You can set the “Save as” in IE file by doing one of the following:

a.  Just type in a directory on the textbox of “Save Address”, like this:

b.  Click “Browse” to help you find the “Save as” directory:

9.  Finally click the button “Apply” to apply it to your computer. Soon, setting is completed.

10.  Recovery (IE) setting:

Malicious software may change your IE setting, you can recover it to the default IE setting.

The default settings of IE after you click “Recover” are as following:

1  Home Page: about blank

2  Content Password: none

3  Address List: none

4  Context Menu: enabled

5  Source: enabled

Click “Recover” and it will recover your IE setting to the default one. 

11.  Soon setting is completed.